梯形排主要用于制造直流电机的换向器片。用冷轧和冷拉法制造,一般为梯形铜排。梯形银铜合金排可提高电机的使用寿命。
jb/t9612.2-1999
梯形排表示方法:t/h/a
高度h标称值推荐如下h recommended:
10,11.2,12.5,14,16,18,20,22.4,25,28,31.5,35.5,40,45,50,56,63,71,80,90,100,112,125,132,140,150mm。
梯形排截面尺寸范围cross-section:
t≤24、h≤150、h/t≤50
三、产品性能product performance:
1)扭度distortion
500mm长度内侧面扭度不超过2.5mm。
not more than 2.5mm per 500mm.
3)直度straightness
两底边在1m长的直度a>2°,h<50mm时不超过2mm,a≤2°,h≥50时不超过3mm。
straightness of the two base is not more than 2mm per 1m when a>2°,h<50 and 3mm when a≤2°,h≥50.
2)硬度hardness
梯形铜排表面硬度为hb80~105,银铜合金排表面硬度为hb85~105。
the surface hardnss of trapezoidal bus bar is hb80~105,and copper alloys is hb85~105.
四、化学组分chemical composition:
型号 type |
名称 name |
材料化学成分 chemical composition % |
|
铜 银 不少于 cu ag |
其中含银 ag |
||
tpt th11pt th12pt |
梯形铜排 一类梯形银铜合金铜排 二类梯形银铜合金铜排 |
99.90 99.90 99.90 |
— 0.08~0.15 0.16~0.25 |